Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2011, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 24 May 2011 20:45:58 -0400
Reply-To:     Karl Ploessl <karl.ploessl@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Ploessl <karl.ploessl@GMAIL.COM>
Subject:      Re: Need towball or receiver for SA tow hitch
Comments: To: BenT Syncro <syncro@gmail.com>
Comments: cc: David Beierl <dbeierl@attglobal.net>
In-Reply-To:  <32F78BE6-ADEF-4977-AE45-ECB148394BA1@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

tried to measure and I got 3 3/8" and 1 3/4" center to center of the bolts. The width seems to be ok and I got 12 mm bolts in there (filling up the holes), but for the "vertical distance" I got only 10 mm bolts in, otherwise the holes wouldn't have "lined up". Now I am not towing anything (Jenny, the '81 AC has enough to pull herself) and I figured that the rack I have on occasionally, only has downward weight.

Hope I added enough confusion :-)

Karl.

PS. the fellow form the website (I mentioned earlier) answered when I inquired about the distance of the mounting holes: The mounting holes on the hitch is 3.5" across the and 2" up and down center

PS. Ron in 2005 mentioned that he found parts form a Landrover which would fit but I was never able to find anything.

On Tue, May 24, 2011 at 7:31 PM, BenT Syncro <syncro@gmail.com> wrote: > OK these numbers are making more sense with David's correction. > 3 3/8"  or  85.725mm (from Karl's link) > 3 1/2"  or  88.900mm (David's revision) > 1 3/4"  or  44.450mm (from Karl's link) > 2"       or  50.800mm (David's revision) > > I took some measurements off the European towhitch on my Syncro and that > came out to 3 1/2" on the horizontal. Just a wild guess but looking like the > SA hitch has the same hole spacing as the Euro hitch. > > BenT > On May 24, 2011, at 4:07 PM, David Beierl <dbeierl@attglobal.net> wrote: > > > The bolts on my receiver adapter are spaced 95.5mm O.C. horizontal by 58.128 > vertically on one side and 57.125 on the other.  Or in inches, 3-3/4 x > 2-1/4. > > No they're not, I did the arithmetic wrong.  They're 3 1/2 x 2" on centers. >  What a maroon! > > Yrs, > d > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.