Date:         Thu, 26 May 2011 06:35:40 -0400
Reply-To:     Eric Ley <eric_ley@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Ley <eric_ley@HOTMAIL.COM>
Subject:      Re: Driver's side "A" pillar wiring
Comments: To: Rob <becida@COMCAST.NET>
In-Reply-To:  <vanagon%2011052602463264@GERRY.VANAGON.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

Use a coat hanger or electrical fish when I installed the RCA cables for my
TV that's what I used.

--------------------------------------------------
From: "Rob" <becida@COMCAST.NET>
Sent: Thursday, May 26, 2011 2:19 AM
To: <vanagon@GERRY.VANAGON.COM>
Subject:      Re: Driver's side "A" pillar wiring

> How hard is it to get wires to go up or down that pillar? Any tricks
> to the job?
>
> Rob
> becida@comcast.net
>
> At  5/25/2011 10:17 PM, Reid Erikson wrote:
>>For embarrassing reasons, I'm now in the process of getting wires
>>down (or up) my driver's side "A" pillar. Just want to make sure I
>>get all the needed wires while I still have everything apart. From
>>the melted clump I'm left with, I believe there should be four:
>>
>>Red-power to dome and kitchen lights
>>Black-to the rear defogger
>>Brown-ground
>>Brown/White-door switch
>>
>>Anything I'm missing?
>>Thanks,
>>Reid
>>
>>1990 GL Westy Full Camper
>