Date:         Fri, 27 May 2011 08:55:38 -0600
Reply-To:     Richard A Jones <Jones@COLORADO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard A Jones <Jones@COLORADO.EDU>
Subject:      Westy sink face removal
Content-Type: text/plain; charset=ISO-8859-1

I want to remove the panel below the sink/stove--the one
where the LED panel is mounted and the gas knobs are.

I have it loose and can pull out the bottom.  I thought
it just was in a groove of the sink/stove stainless and
should come up out of that groove and be off.

Is that right?  I can't seem to budge mine, but it does
have 24 years of stuff down in that groove.  Or is there
something I don't know about it?

Thanks,
Richard

PS: I want to remove that panel because I smell propane
there.  The stove burners work fine, but when (at least)
one is one, there is a faint propane smell coming through
that vent between the knobs.