Date:         Fri, 27 May 2011 17:10:21 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Where can this wire be found?
Comments: To: Rocket J Squirrel <camping.elliott@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="utf-8"; reply-type=original

re
So the wiring diagram Bentley page 97.56, current track 29 is in error?"


looks to me like the only thing they got wrong was the value of the OP
switch there on track 29.
Just correct it to 0.3 bar.


----- Original Message -----
From: "Rocket J Squirrel" <camping.elliott@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, May 27, 2011 2:23 PM
Subject: Re: Where can this wire be found?


> On Fri, 2011-05-27 at 00:04 -0400, David Beierl wrote:
>
>> At 10:20 PM 5/26/2011, Edward Duntz wrote:
>> >You mention a stock 1.8 bar switch, but say you have a 1.9. Doesn't
>> >the 1.9 have a 0.3 to 0.5 bar switch? It's the 2.1 that has two
>> >senders, including a 1.8 bar one, right?
>>
>> Bloody Bentley.
>>
>> The 1.9l has a 0.3 bar sender, normally closed.
>>
>> The 2.1l has ditto, plus a 0.9 bar sender, normally open.
>>
>> No WBX has a 1.8 bar sender.
>
>
> So the wiring diagram Bentley page 97.56, current track 29 is in error?
>
> Thanks for pointing out the error. Time to break out the White-out!
>
> -- RJS