only a little oil will dribble out. tin should be mounted all with 13mm hex head fasteners. I would do my testing to engine block, not frame ground, but should be the same.
----- Original Message ----- From: "Rocket J Squirrel" <camping.elliott@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, May 29, 2011 9:01 AM Subject: Yeppers -- failed oil pressure switch alright.
> (1981.9L) Got the tin off the bottom of the left head. Three 13mm and > one 12mm? Who designs such things? > > The switch reads open to frame with the engine off, so it's a goner. > Found the fossilized remains of what appears to be an ancient > Pre-Columbian rubber boot on the switch. After than crumbled off, the > the brass push-on connectors had nice green verdigris. > > I gotta do something about this. > > When I pull the switch, will there be much engine oil loss? > > -- > Rocky J Squirrel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.