Pilot bearing... Daryl of AA Transaxle 425-788-4070 "On the cutting edge of Old technology" 86 Syncro Westy w/Turbo Zetec in the trunk
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Kevin Plichta Sent: Tuesday, May 31, 2011 7:09 PM To: vanagon@GERRY.VANAGON.COM Subject: Not able to engage any gear Looking for some wisdom. My 91 stock manual, I can not get it to engage in any gear while to motor is running. If I start it with the clutch to the floor and in 1st it acts like its engage (wants to jump forward). I have check the master and slave clutch cylinders and they are not leaking and seem to move when the clutch is pushed down. Seems that with the motor running makes it not want to go into any gears and the motor off goes easily into all the gears? What is different when running or not? Thanks for your help. Kevin Plichta |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.