Ah -- the old "break out the ohmmeter" trick, eh? On Sun, 2011-06-05 at 13:59 -0400, David Beierl wrote: > At 01:22 PM 6/5/2011, Rocket J Squirrel wrote: > >Stupid thing. I already replaced it once, about four years ago. What's > >up with that part? Lousy design? > > Good to have a spare, even though the 1.9l ones cost more than the > 2.1l. But certainly no harm to unplug/replug, exercise the > connection. And to get more information, before you do that wait > overnight then unplug the ECU and do the resistance check on 24.20, > third step. If you get a reading at that plug that's within spec for > the temperature (see previous page) it would suggest TII is not the > problem. If it's out of spec, check/clean connection at sender, see > if that fixes. > > Yrs, > David > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.