At 07:31 PM 6/2/2011, Don Hanson wrote: >for re-greasing and the balls were blue and pitted That blue is an "optical color" caused by a film of oxide (that we'd call rust if it were thicker) so many wavelengths of light thick. Just like when you're grinding a carbon steel tool or blade, it means that the steel is now much softer than before, for some appreciable depth.* In other words, history. The pitting is a result. *it's just an indicator. If the steel's gotten hot enough to grow that thick a layer of oxide, it's lost enough hardness to no longer be able to take an edge. As the layer builds up it goes from pale straw to dark to purple to blue and then sky blue, as the thickness of the layer causes different phase interference of the incoming and outgoing light. Good photo here: http://www.thecarvingpath.net/forum/index.php?/topic/945-notes-on-heat-treatment-of-carbon-steel/ search the page for Temper Colors (about halfway down). Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.