VANAGON archives -- June 2011, week 1 (#149)

Date:         Fri, 3 Jun 2011 10:34:57 -0400
Reply-To:     Ken Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: '85 a/c compressor bracket bolt specs
Comments: To: Karl Wolz <wolzphoto@Q.COM>
In-Reply-To:  <BLU0-SMTP1733FB6722E85F9415D302AA67F0@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Karl, I doubt you are going to be able to find the longest of these
bolts at your local hardware store.
1- 104x10
3- 38x10 (allen head)
2- 48x10
1- 70x8 (carriage bolt)
1- 68x8 (fully threaded)
1- eye bolt (for adjustment)
1- 25x8 (bolt)
3- M8 nuts

I believe all of the M10 bolts are 1.5 thread pitch and the M8 are 1.25
thread pitch.  Hope this helps you.


--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: 856-327-4936
Fax: 856-327-2242





On 6/3/2011 9:34 AM, Karl Wolz wrote:
> Does anyone happen to know what size bolts I need to pick up to mount the
> a/c compressor bracket to the block (older style) and the compressor to the
> bracket?
>
> TIA
>
> Karl Wolz
>

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.