Date:         Mon, 6 Jun 2011 08:49:35 -0700
Reply-To:     Daryl Christensen <daryl@AATRANSAXLE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Daryl Christensen <daryl@AATRANSAXLE.COM>
Subject:      Re: is there a resource to find out cost of labor?
Comments: To: T Collins <tonycollin@GMAIL.COM>
In-Reply-To:  <BANLkTimiwKv6+7Xbf-s3d-3531KrYSy-jw@mail.gmail.com>
Content-Type: text/plain; charset="US-ASCII"

Tony..The dealerships are typically the most expensive place to have work
done in my experience...An independent shop should be the better spot...I
would say Craig is right at about 3 hrs labor is the norm plus parts.
Remember these creatures are getting old and some of the stuff like backing
plates just plain wear out...

Daryl of AA Transaxle
425-788-4070
"On the cutting edge of Old technology"
86 Syncro Westy w/Turbo Zetec in the trunk

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of T
Collins
Sent: Monday, June 06, 2011 5:23 AM
To: vanagon@GERRY.VANAGON.COM
Subject: is there a resource to find out cost of labor?

Hello folks,

I wondered if there is there is a cost of labor scheme that I could look at
for potential repairs.
For instance, I took the Vanagon to my local dealership for a brake job all
around.
I need to know what is the estimated amount of hours for a job like this?

Thank you,
Tony
--
82 Scirocco "Rodolfo"
85 Vanagon "El Guapo"
http://groups.google.com/group/wash-co-vws2<http://groups.google.com/group/w
ash-co-vws2?lnk=gcimh>
 (new)