How bad is your spindle? An aviation or industrial machine shop can probably repair it for you. There are many options such as metal spray or weld up and machine and if needed re-heat treat it. At worst the shaft can be cut off and a new one welded in place. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Edward Maglott Sent: Tuesday, June 14, 2011 9:33 PM To: vanagon@GERRY.VANAGON.COM Subject: seeking spindle for 86 (2wd w/ PS) I thought this would be easy to find. I guess all the old Vanagons have been crushed or we're driving them around. Anybody got a good front spindle to sell me? I'm in NC. Thanks, Edward |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.