I have not really looked at the exhaust to see how it is attached to the heads, but in Aviation Mechanic School, we were taught to use either brass nuts on studs on the exhaust system or special steel heat treated high heat nuts with anti-seize compound on the threads of the studs. John Rodgers John Rodgers Clayartist and Moldmaker 88'GL VW Bus Driver Chelsea, AL Http://www.moldhaus.com
On 6/9/2011 8:58 AM, Rocket J Squirrel wrote: > what > to use on the fasteners that hold the exhaust flanges to the heads. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.