Seems to me I've used 12mm a time or two when fiddling with the exhaust system on my 1.9L. Most likely a wrench due to the limited space down there among the twists and turns of the pipes. pr On Fri, Jun 17, 2011 at 11:35 PM, Karl Wolz <wolzphoto@q.com> wrote: > 24mm on steering wheel nut and on oil pressure switches. > > Karl Wolz > > |-----Original Message----- > |From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] > |On Behalf Of Ed Duntz > |Sent: Friday, June 17, 2011 10:32 PM > |To: vanagon@GERRY.VANAGON.COM > |Subject: Re: wrench/socket (nut and bolt head) sizes > | > |Where are the 22 mm and 24 mm used? > | > |Ed > | > |-------------------------------------------------- > |From: "Scott Daniel - Turbovans" <scottdaniel@TURBOVANS.CO > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.