What you are describing sounds nothing like the stock way of removing the AFM box. It takes under 30 seconds, all standing up. Mark
John Rodgers wrote: > Does anyone know of a good alternative method to secure the > AFM/Air-Filter box so it doesn't move around. That factory mount of the > box is an abomination. It's an absolutely miserable thing to get to, and > when you need to work on top with the box out - you have to go > underneath and remove the shield and then the two bolts holding the box. > Then you can go back on top to remove the box and do your work. What a > crappy arrangement. > > Anyone know of alternatives that are secure? Alternatives that don't > require getting under the van and doing all that removing? > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.