Okay, thought I had the cold start issue solved by cleaning the contacts to the Temp 2 sensor, but the van is being stubborn again. I just got a replacement sensor from the depot of buses so I'll bang it in and see if it helps. Question: what if the connector on the cable that connects to the sensor is knackered? (1.9L). It's an unusual-looking locking two-pin unit that I wonder is replaceable by anyone that solders. -- RJS
> > At 6/3/2011 03:58 PM,Rocket J Squirrel wrote: > >Mellow Yellow (1.9L) and I are having a disagreement. > > > >First start of the day, not even terribly cold, like in the 40's > >(Fahrenheit), Mellow Yellow does not feel like starting. The starter > >turns, but the engine only catches half-heartedly. > > > > From that point on, throughout the day, the engine starts on the first > >touch of the starter. > > > >(It's the Temp II sensor, isn't it? It's always the Temp II sensor.) > >-- > >Rocky J Squirrel > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.