I may know more about that if I take this thing apart .. which I probably will be doing. I won't say much, but I had some direct phone dealings with the owner of Tiico about their planned 1.9 TD kits.. it wasn't pleasant and rewarding, let's say. I went nutty looking into why SVX subaru engines with an adatper and rear mount system were breaking studs. VW doesn't even use 'real' locating dowels in their waterboxer bell housings. Just a lip. it's a joke. the 10mm bolts and studs ..they're in 12mm diamter holes through the wbxr bell housing ..and one of the holes is 14mm ... so no real 'locating there.' joining the two on the ground shouldn't make any difference. if it's a decent locating system .. doesn't matter where you mate them . 'lots' of conversion parts are underbuilt or poorly designed in my experience. to much of 'this might be good enough' and not enough of 'make it as good as we can possibly figure out.' and it doesn't have to cost more to do it right. the forces acting an SVX engine adapter with a rear mount system .. about 5 seperate forces.. rotational, the sheer weight being supported at the ends with the mounts at the far ends... the up-down 'thrust' when you let the clutch out , etc. There's a good reason most manufacturers make that junction so there is no question about anything going anywhere. Subaru and volvo are good examples. Nice fat pins or dowels, etc. Numerous good size bolts, and so on.
----- Original Message ----- From: "mark drillock" <mdrillock@COX.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, June 27, 2011 5:38 PM Subject: Re: I4 Happenings in turbovans land
>I agree, the inline VW engine has large dowel pins that precisely locate > it with respect to the adapter plate or stock DV bell housing, > whichever. Any notion that putting the engine and tranny together and > then installing as a unit makes the 2 parts somehow more aligned is > highly questionable to me. Maybe the interface between the TIICO plate > and the tranny is more open to position variances that account for such > an assertion. > > Mark > > Scott Daniel - Turbovans wrote: >> hi Mark, >> nice to see your comments. >> I concur. >>...................... >> re Don's comments .. >> "slip-shod assembly procedures..mainly bolting it up without having >>>> things properly straight. " >> >> I have put many adapter systems together. >> We'll see how this one looks if I take it apart ... >> but generally .. >> of the adapter systems I've assembled, name subaru .. >> there isn't a way to get 'not straight.' . >> >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.