Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2011, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 28 Jun 2011 10:31:48 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: I4 Happenings in turbovans land
Comments: To: mark drillock <mdrillock@COX.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

the big advantage of a five speed is having 3 ratios from roughly 35 or 40 mph ......to top speed. With a 4 speed you only have two ratios in that speed band.

that's where the 5 speed helps so much , above 35 or 40.

----- Original Message ----- From: "mark drillock" <mdrillock@COX.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, June 28, 2011 9:16 AM Subject: Re: I4 Happenings in turbovans land

> Now that you have given up on the original conversion engine it will be > interesting to see what kind of service the new setup gives you over > time. Preemptively resetting the clock as it were. Different motor and > different exhaust. Sounds like a step up in both cases. > > A 5 speed will generally outperform a 4 speed in the hills, so compare > apples to apples if truth is of any concern. > > Mark > > > > Don Hanson wrote: >> >> My van, before I *pre-emptively* swapped in the ABA 2.0 liter block, >> when >> it came to me with it's '92 Golf/Cabriolet motor... it had the "rather >> dorky" diesel exhaust manifold. Yes, it was pretty restrictive looking >> and >> the hanging system was very crude, to say the least. The guy who did the >> conversion, he was a door builder, not a mechanic. He welded on a really >> tight bend right below that cast diesel manifold and ran a pipe right >> straight back to a "fart can" muffler that stuck straight out back, with >> a >> steel hanger welded to the frame. >> >> I added a magnaflow muffler across the back of the motor just ahead of >> the >> bumper, hanging that on a flexible mount to the frame. I drove it that >> way >> for two years without any problems. That diesel exhaust >> manifold...strong! >> Even as restricted as that exhaust manifold must have been, I still >> often >> drove past WBX vanagons on hills. >> ................. >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.