Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2011, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 10 Jul 2011 09:37:23 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: [Friday] Bolts -- Rockwell hardness translate to grade?
Comments: To: David Beierl <dbeierl@attglobal.net>
In-Reply-To:  <4e188737.4f76e50a.29c9.ffffa648@mx.google.com>
Content-Type: text/plain; charset="US-ASCII"

Yes the ball is larger, 3/8. Have to stop answering thing when I should sleeping. The kit we have uses a shear pin to drive the ball. Hit the tool with the hammer and the pin breaks and the ball leaves the dent.

Dennis

-----Original Message----- From: David Beierl [mailto:dbeierl@gmail.com] On Behalf Of David Beierl Sent: Saturday, July 09, 2011 12:50 PM To: Dennis Haynes Cc: vanagon@GERRY.VANAGON.COM Subject: Re: [Friday] Bolts -- Rockwell hardness translate to grade?

At 01:20 AM 7/9/2011, Dennis Haynes wrote: >Brinell testing 60 pound ansi rails for automated storage-retrieval >cranes. The 1/16" ball penetration test.

Rockwell and Brinell measurements differ in some fundamental ways. Rockwell measures the difference in penetration *depth* between a 10 kGf preload and the working load of 60, 100 or 150 kGf. The hardness number is read directly from the machine's scale. T

Brinell applies a calibrated force - unless otherwise stated the penetrator is a 10 mm (fat 3/8") ball and the force is 3,000 kGf - and the *width* of the indentation is measured by examining it through a microscope with a calibrated graticule. The Brinell number is obtained by formula or by use of a table supplied with the machine.

Yours, David


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.