Date:         Mon, 11 Jul 2011 19:23:59 -0700
Reply-To:     Mike Miller <mwmiller6@ATT.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Miller <mwmiller6@ATT.NET>
Subject:      for sale:  2.1 engine / 50 degree mounting hardware
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

Vanateers!

If all goes well I will have a 2.1 syncro engine for sale this week.

BenT tells me that the syncro engine is slightly different, who knew?
I think it will work in 2 wheel drive vans as well. If I'm wrong some
one will quickly tell me so.

Anyway it was rebuilt by Roger, then of the Bus Lab, who sold me the
van. He said it had about 30k on it when i bought it. I put about
20-30k [don't know exactly, my odometer broke last year].

Runs good. Uses about a quart of oil between changes, especially if
it's been used to go to SoCal. Also may use a bit depending on how
often it's entered in the drags at bURNINGvAN.

Includes the ECU and all the ancillary stuff not used in a diesel
conversion.

It's in the San Francisco bay area, delivery available within a
reasonable distance. Reasonable varies with the price paid, my time
and mood.

$750 if you pick up or I deliver.

50 degree mounting hardware for sale. I went the 15 degree route.

engine carrier bars
oil pan
bell housing
oil level check tube [I think]
and I think some other pieces that I just now forgot to ask BenT about
but I will when he gets off the phone with Spicy T.

$600 if you pick up or I deliver, same deal as engine

Mike
415 256-1119
916 747-1255