Date:         Tue, 19 Jul 2011 09:30:02 -0400
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: radiator grill
Comments: To: ed donnen <spliced.surprise@GMAIL.COM>
In-Reply-To:  <CAFwVvJCVhvAqbHHJNMczmN0ppVvuUECTeYYZVPzMeve3hgVt1g@mail.gmail.com>
Content-type: text/plain; CHARSET=US-ASCII

the lower grill has 4-6 screws that thread into a plastic bushing insert. The insert then fits into a snap housing in the grill. if the screws are missing, it should be a simple matter to remove the plastic insert and the grill should just fall out.

I know when installing Projektzwo foglights, that you have to remove 4 of the screws. I don't recall if there are two additional ones in the center or not (I believe their are, but I'm not positive.)


On Jul 19, 2011, at 6:57 AM, ed donnen wrote:

> Scott was right, I meant lower grill
>> I kinda figured the guy would say 'head light grill' if he meant the upper
> grill.
>> I think the question is about the lower grill.
>
> I have what appears to be attaching points at the top of the grill, but no
> screw heads or anything to remove.  Once again the top grill and the bottom
> grill seem to be designed by two different guys- why can't they all just
> have screws in the front for easy removal?
>
> ed-still perplexed