Date:         Sun, 17 Jul 2011 08:15:07 -0600
Reply-To:     ralph meyermann <ralphmeyermann@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ralph meyermann <ralphmeyermann@GMAIL.COM>
Subject:      Re: Bus Depot Awning clamp
Comments: To: James Felder <jim.felder@gmail.com>
In-Reply-To:  <CAAj276z65ctBCpUNbLQEqV4yTsiErrbdD7wuymL6nsF0PtBtDw@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

I've had good luck using 3m weather strip adhesive aka "gorilla snot"due to
its color its been useful for a number of things mostly gluing cork gaskets
to valve covers and other similar applications works 10x better than any
silicone gasket sealer the only pain is removing it to replace gaskets due
to checking/setting valve lash three times a weekend racing friday,saturday
and sundays then felpro came out with a wonderful re useable system

On Jul 17, 2011 8:00 AM, "James Felder" <jim.felder@gmail.com> wrote:

That sounds like a good idea. I actually use two of these all the time to
hold an awning on. I have not had difficulties as they are, but the plastic
coating would be nice.

An alternative might be to use a good adhesive to permanently mount the
rubber strips in the clamps.

Jim




On Jul 17, 2011, at 5:55 AM, J Stewart <fonman4277@COMCAST.NET> wrote:

> When I had one of those...