Date:         Wed, 20 Jul 2011 05:22:54 -0400
Reply-To:     Frank Condelli <RAlanen@AOL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: radiator grill
Content-Type: text/plain; charset=us-ascii

        Ed, VW in its infinite wisdom changed the design of the lower gill clips late in production so you most like have these new style clips either by default or someone has ordered up all new ones from VW and changed them to the new style.  Nevertheless here's how they work >  in the centre of the clip where the screw used to be is instead a push pin.  You must use a small round metal drift to push the pin out.  It will go out the back and fall on the ground if your lucky.  Anyways not to worry about loosing the pins BECAUSE you can put them back using #10 phillips, flat head, sheet metal screws.  Mystery solved !


On 2011-07-19, at 12:27 PM, Automatic digest processor wrote:

> YEP Kim, that is exactly what it looks like.  THANX for a clear and concise
> explanation.  However, the PO must have used some new-fangled snap that did
> not require a screw, which means  it fits real tight, and therefore will
> need some especially clever tool to reach between the grill and not break
> anything when removing.  Maybe a tightly bent blade of a common screwdriver?



Cheers,    

Frank Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (Collection for sale)
Frank Condelli & Associates - Vanagon/Vanagon Westfalia Service in the Ottawa Valley
Vanagon Stainless Steel Exhaust Systems
BusFusion a VW Camper camping event, Almonte, ON, June 09 ~ 12, 2011