Date:         Fri, 15 Jul 2011 22:38:50 -0700
Reply-To:     Roger Whittaker <rogerwhitt1@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Whittaker <rogerwhitt1@GMAIL.COM>
Subject:      Re: Rusted hydraulic clutch lines
Comments: To: Tom Stone <tstone8359@aol.com>
In-Reply-To:  <8CE116F93003A24-1374-6A202@Webmail-d103.sysops.aol.com>
Content-Type: text/plain; charset=ISO-8859-1

dear tom
can these be manufactured in a hydraulic shop
what they do is cut off your good ends and swedge on high pressure fittings
just like rebuilding a high pressure power steering hose
regards

On Fri, Jul 15, 2011 at 6:34 PM, Tom Stone <tstone8359@aol.com> wrote:

> Where does one obtain the proper "bubble" hydraulic lines for the clutch?
>  I need all the pieces from the master cylinder to the slave cylinder.
>  Don't see them on the usual list vendor sites.
>
>
> Tom
>



--
roger w
 From Proverbs:
Under three things the earth trembles, under four it cannot bear up: a
servant who becomes king ...
----------------------------------------------------------
Explore printed work at: http://www.prliving.ca/
View the growing list of video work at:
http://www.prpeak.com/articles/2010/11/29/multimedia/video/doc4c62e5f80d228504902172.txt