Date:         Sat, 23 Jul 2011 13:52:11 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Fan resistor
Comments: To: Kenneth Lewis <kdlewis@NORTHSTATE.NET>
Content-Type: text/plain; charset="us-ascii"; format=flowed

>I suspect the unit might be usable if you run its primary output
>through a resistor and then parallel the secondary output
>direct.  That could depend on how it's wired internally, but on the
>face of it I think it would work.

On second look, when you turn the A/C on this controller runs both
fans at full speed (the second output is just an on/off signal to an
external relay).  I think most people would not want that monster
running at full speed any time they're using the A/C...

Yours,
David

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.