At 12:16 PM 7/30/2011, Daniel Rotblatt wrote: >When the inverter is connected and no load, the voltage drops >immediately down to 8volts - no sagging. Disconnect the inverter >and the voltage at the battery reads 12.x volts again. I don't >think it's a bad battery. Since I cut off the posts to make it fit, >it's mine now anyway. A load high enough to make your battery voltage drop to 8 volts when you connect it would cause smoke and flames to come out of the inverter and/or wires. You have a high-resistance connection in the battery somewhere, no doubt at the post as previously mentioned. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.