Date:         Sat, 30 Jul 2011 15:28:17 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: PS High Pressure ling w/Banjo Fitting Needed
Comments: To: Karl Wolz <wolzphoto@q.com>
In-Reply-To:  <6DB52C24AF7F4A91882B253425AA39F4@KarlPC>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

  Karl,

It's the small fitting. The one that has the pressure switch on the end
of the banjo, The hose has a swaged fitting on the opposite end from the
banjo and fastens by a nut to the tubing going forward.

John

John Rodgers
Clayartist and Moldmaker
88'GL VW Bus Driver
Chelsea, AL
Http://www.moldhaus.com


On 7/30/2011 2:09 PM, Karl Wolz wrote:
> IIRC, there are two banjo fittings on the PS pump, one a bit larger than the
> other.  Do you know which one you need?  I think I have one, perhaps both.
>
> Karl Wolz
>
>
>
> |-----Original Message-----
> |From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]
> |On Behalf Of John Rodgers
> |Sent: Saturday, July 30, 2011 11:44 AM
> |To: vanagon@GERRY.VANAGON.COM
> |Subject: PS High Pressure ling w/Banjo Fitting Needed
> |
> |  Got ready to install a new PS pump on my '88GL restoration
> |project and discovered the above part is missing.
> |
> |Anyone got a spare?
> |
> |Thanks,
> |
> |John
> |
> |--
> |John Rodgers
> |Clayartist and Moldmaker
> |88'GL VW Bus Driver
> |Chelsea, AL
> |Http://www.moldhaus.com
> |-----
> |No virus found in this message.
> |Checked by AVG - www.avg.com
> |Version: 10.0.1390 / Virus Database: 1518/3798 - Release Date:
> |07/30/11
>
>
>