Agreed, but the elbow bulkhead fitting at tank and the faucet are bottlenecks. It is meant for 3/4" lines. I think that sometime in the future I'll put in an inline pump so that I can drive the water through a filter and not lose much delivery. alistair
On 2011-08-12, at 8:14 PM, David Beierl wrote: > At 10:37 PM 8/12/2011, Alistair Bell wrote: >> So it seems that the bilge pump would pump more/better. But to tell the truth, it didn't "seem" much better. But it works all the time as opposed to the baulky old stock one. > > It will give lots more output if you run bigger lines all the way to the end, possibly including the spigot. And turn slower and draw more power. It's meant for what, 5/8" lines? > > Yours, > David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.