At 07:54 PM 8/17/2011, John Lauterbach wrote: >with gunk. Have drilled it out with #60 drill. Not sure if right or If Bentley 24.24a is correct, a #80 would still be twice too big - they allege that the hole is only .15 mm/.006". Doesn't seem likely they did the conversion in the wrong direction since .15" would hardly be a restriction. However since it's only operating the valve for the charcoal canister (and the suction line for that has its own .055" restrictor) I doubt it's a fatal error. Maybe should be noted though that air coming through the canister is unmetered, so it definitely wants the restriction in the suction line. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.