Date: Tue, 23 Aug 2011 19:15:27 -0500
Reply-To: Tom Hargrave <thargrav@HIWAAY.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tom Hargrave <thargrav@HIWAAY.NET>
Subject: Re: Alternator Brushes Wore Out Pretty Darn Quick
In-Reply-To: <4E541BE1.20402@gmail.com>
Content-Type: text/plain; charset="us-ascii"
Yep, probably bad brushes. The grooves will cause initial fast wear until
the front of the brushes conform.
Thanks, Tom Hargrave
www.stir-plate.com
www.towercooler.com
www.kegkits.com
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Rocket J Squirrel
Sent: Tuesday, August 23, 2011 4:30 PM
To: vanagon@gerry.vanagon.com
Subject: Re: Alternator Brushes Wore Out Pretty Darn Quick
On 08/23/2011 09:11 AM, Jim Arnott wrote:
> -----Original Message----- From: Rocket J Squirrel
> I was concerned that if I removed
> the nut so I could really get at the back of the alternator, my fingers
> would not be able to get the nut back on in that cramped area. It's
> pretty tight in there. Needlenose pliers?
>
> 13 mm box end wrench with a fold of electrical tape on one flat of the
> nut to hold it into the wrench. Magnet on a stick to retrieve it when it
> falls out. The second time you'll get it.
Yah, you and Karl are right, it's not that difficult. In a campsite many
miles up a dirt road, I wasn't feeling so certain I could get it back
on, or whether it might tumble down into the engine compartment or
become at one with the pebbles and dirt under the van. Now that I'm in
the driveway, it's easy peasy.
Helps to have an open-end 13mm wrench, too.
I pulled the alternator to inspect the slip rings. Someone here said
they were brass (or brass colored) but mine appear to be shiny copper.
They show no signs of pitting, though they are grooved in the direction
of rotation, see photo
<https://picasaweb.google.com/j.michael.elliott/WestySVRBrushes?authuser=0&a
uthkey=Gv1sRgCPGts4P8w62IsgE&feat=directlink>
To my untrained eye, I see nothing that would grind down the brushes on
the aftermarket adjustable voltage regulator. Perhaps it is as Scott
said, "I have had an electronic adjustable voltage regulator wear out
brushes in my personal turbo Volvo sedan in as little as 8,000 miles."
Unless I hear otherwise, I think I got me some junk brushes here.
--
Jack "Rocket j Squirrel" Elliott
Bend, Ore.
1984 Westfalia. A poor but proud people.
1971 "Ladybug"-brand utility trailer ca. 1972 from a defunct company in
San Clemente, Calif., now repurposed as The Westrailia.
Sent from my kitchen.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1382 / Virus Database: 1520/3852 - Release Date: 08/23/11