-----Original Message----- From: Rocket J Squirrel I was concerned that if I removed the nut so I could really get at the back of the alternator, my fingers would not be able to get the nut back on in that cramped area. It's pretty tight in there. Needlenose pliers? 13 mm box end wrench with a fold of electrical tape on one flat of the nut to hold it into the wrench. Magnet on a stick to retrieve it when it falls out. The second time you'll get it. Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.