Here are the details. O2-sensor not connected. Voltage from O2-cable coming from engine is +0.46 volts. Again, O2-sensor is not connected. I have tried with two different ECUs and get same result. With engine off, resistance between O2-cable coming from engine and ground is 140K ohms. I have a spare FI cable assembly and get same resistance from that cable when a ECU is connected. If I connect O2-sensor as intended, engine runs rich and stalls. John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.