Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2011, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 25 Aug 2011 19:57:50 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Van Died @ 70 MPH. Why? (Jetta conversion)
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
In-Reply-To:  <0e0901cc639a$c0be4470$6401a8c0@PROSPERITY>
Content-Type: text/plain; charset=ISO-8859-1

Yes lots to change, but it may be that I have to change some things to get everything the way it "should be". Like I'm still not happy with the exhaust. Have to figure out why the cat cracked loose. It was fine for many thousand miles.

yah tilting the motor to 50* is a fair amount of work. Still. VAG figured it out. I'm sure it wasn't just to keep the engine under the lid that they did the Diesel the way they did. e.g. they wouldn't have tubbed the engine lid. But what the heck. I learned a lot doing my swap this way, and it's been really reliable up til that last event. In hindsight though, things like the "tubbing" the engine cover just don't seem right. On hot days, all I can see is all that heat billowing up into that box, staying there, and adversely affecting things beyond the scope for which they were designed.

We'll see. Thankfully I had the KEP adaptor drilled for 50* mount (thank your Mark Drillock) so that much is ready to go.

Making the box wider on the engine lid is not much work.

Neil.

On Thu, Aug 25, 2011 at 7:44 PM, Scott Daniel - Turbovans <scottdaniel@turbovans.com> wrote: > I suppose this hot fuel hose theory could .. > apply, or be a factor .. > I wouldn't invest huge amount of energy in it though . > just practical things. > > the engine mounting angle is not a major factor .. > and it would be a lot of work to re-do the whole installation. > > new exhaust, lots of stuff to change.

-- Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.