Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (August 2011, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 24 Aug 2011 21:51:05 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: cluch problem
Comments: To: mkriley@FUSE.NET
Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original

re fluid in the boot must have sucked air."

there should never be fluid in the boot. It is just a dust seal ..a rubber boot to keep moisture out , etc.

the actual seal is on the piston up in the cylinder. if there is fluid in the boot, the slave is leaking ..and due for replacement.

----- Original Message ----- From: "Mike Riley" <mkriley@FUSE.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, August 24, 2011 7:15 PM Subject: Re: cluch problem

> ---- Dennis Haynes <d23haynes57@hotmail.com> wrote: >> Does the pedal feel any different or is the clutch just not disengaging? >> If the hydraulics are bad that can usually be felt. The driver (master) >> cylinder can have a clog or bad check causing the effect. The clutch may >> actually be failing or the pilot bushing may be seizing causeing the lack >> of disengagement. There is no spec for free play on the operating lever >> because there should not be any. Constant contact. >> >> Dennis >> >> -----Original Message----- > after it cooled down i pulled the slave, fluid in the boot must have > sucked air. > weird > > >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf >> Of Mike Riley >> Sent: Wednesday, August 24, 2011 2:10 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: cluch problem >> >> I have a strange problem on a 85 vanagon clutch. >> driving down the road the clutch suddenly engages at the bottom of the >> pedal travel not the top like normal. >> Going down a steep hill at the time, basically shifts ok and no noise. >> Fluid down a little but could be due to brake wear,none on the slave cyl. >> Master cyl I year old slave orginal. >> anyone have the spec for freeplay on the clutch lever on the bellhousing, >> bently does not seem to have it? >> thanks >> mike >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.