Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2011, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 25 Aug 2011 10:55:30 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Van Died @ 70 MPH. Why? (Jetta conversion)
Comments: To: Don Hanson <dhanson928@gmail.com>
In-Reply-To:  <CAHTkEuKBmukvs_uEopXDio+h-p2zfiLupmNDrEXQtvHf8exOig@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi Don.

I too thought the exhaust was isolated but of course it's bolted to the engine at manifold and there's a ground strap connecting drive train to frame.

I've put that ECU through some paces. This being my first swap. It may indeed be wonky.

My original thought was "fuel pump". But..... when attempting to start it in parking lost, I noticed the MIL not coming on when key turned to ign.

Neil.

On Thu, Aug 25, 2011 at 7:23 AM, Don Hanson <dhanson928@gmail.com> wrote: > > > On Thu, Aug 25, 2011 at 12:18 AM, neil n <musomuso@gmail.com> wrote:

>> >> Driving home, pedal to metal for short burst (less than 1 mile), going >> 70 MPH up hill, van died. >> -- >> Neil n >> >   Original post snipped.. > >   If your 'died' was sudden and abrupt...I think "wires or switches or > connections"...something electrical... > >   Welding with the ECU in the vehicle IS not advisable.  I have been told by > mechanics I trust that it does sometimes destroy the ECU or cause it to go > wonky (a technical term)  That being said, I have had extensive welding done > on the exhaust system of my van and forgotten to remove the ECU without dire > consequences...The engine and the exhaust system ARE isolated from the > chassis by rubber mounts, in my case. >   Fuel pump and fuel pump relay could also be your cause.  Perhaps your coil > is going, too.  Ignition switch is worth looking at. >   At least it didn't start puking coolant and oil all over or pop a > gasket..  Keep us posted, when you find the cause. > >   Don Hanson >   It has been extra hot around here (Oregon/Washington border area) >

-- Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.