Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2011, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 22 Aug 2011 19:44:32 -0500
Reply-To:     Tom Lambas <twlambas@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Lambas <twlambas@GMAIL.COM>
Subject:      Re: Thread locker on rod bolts?
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY152-ds21E0D28C3827145AFFE86EA02F0@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1

The bolts all look the same - 1.9 type I presume. Per Van Cafe I torqued the nuts all down to 33 lbs.

Tom

On Mon, Aug 22, 2011 at 6:29 PM, Dennis Haynes <d23haynes57@hotmail.com>wrote:

> If the nuts are mixed, what about the bolts? Sounds like you have a 1.9 and > 2.1 mixed set. Common from some of the mass rebuilders. I love getting > mixed > sets of brake calipers! > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Tom Lambas > Sent: Monday, August 22, 2011 6:17 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Thread locker on rod bolts? > > Thanks Dennis, > > I decided not to use threadlocker. Removeable stuff was on advice of FLAPS > guy. > > As an aside, one of the rods I got from Van Cafe has the divot for peening > the shoulder of the rod nut into it, and the rest don't. Also one set of > nuts (for one cap) has no shoulder. > Maybe this helps them "balance" the set. > Thoughts anyone? > > Tom L. > > On Mon, Aug 22, 2011 at 4:45 PM, Dennis Haynes > <d23haynes57@hotmail.com>wrote: > > > If you're going to use a thread locker you want the strong stuff > > there. Why even consider removable? Call Loctite and get the new > > torque specs for that application. If the Loctite should do anything > > at all the connection has already failed. > > > > Dennis > > > > -----Original Message----- > > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On > > Behalf Of Tom Lambas > > Sent: Monday, August 22, 2011 1:27 PM > > To: vanagon@GERRY.VANAGON.COM > > Subject: Thread locker on rod bolts? > > > > We'll, I'm back from summer travel and getting back to my 2.1 WBX > rebuild. > > > > I'm installing Rods from Van Cafe. Should I use some removable thread > > locker on the rod bolt/nut? > > > > Thanks, Tom > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.