...not to mention dirt! Flexibility is handled by the corrugations of the boot, not sliding in the small end! So clamp them; yes! Mike B. -----Original Message----- From: Mike S Sent: Tuesday, August 30, 2011 2:32 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: clamps for cv boots, ridged washers for cv bolts At 11:16 AM 8/30/2011, Jim Felder wrote... >Johnson Foreign Auto, my local Vanagon gurus, does not use an inside >clamp >or tie. They claim, and I agree, that the grease should be clinging to >the >joint and not loose in the boot enough to come out onto the axle and >that >has been my experience in 21 years of vanagon ownership. Keeping water out is the concern, not keeping grease in. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.