good zip ties work fine. I have not seen that grease comes out, or water/crud gets in, even with no zip tie or clamp. Scott ----- Original Message ----- From: "Tom Hargrave" <thargrav@HIWAAY.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 29, 2011 6:46 PM Subject: Re: clamps for cv boots, ridged washers for cv bolts
> Some of the VW replacement boots came with what look like large plastic > ZIP > ties - I've put them on several BUG axles and never had a problem with > them. > > Thanks, Tom Hargrave > www.stir-plate.com > www.towercooler.com > www.kegkits.com > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Mike South > Sent: Monday, August 29, 2011 2:14 PM > To: vanagon@gerry.vanagon.com > Subject: clamps for cv boots, ridged washers for cv bolts > > Hi, > > I am happy to report that I have just placed my Zetec in my '85 Westy. > Not > even completely bolted in yet but soooo much better than "hanging on the > hoist in the garage" stage I've been at for quite some time. > > Anyway--the cvs boots I have are the kind where the big end just bolts on. > Anyone have a recommendation for the small end of the boot? I had to > switch axles because I'm also doing the AT->MT conversion on this van and > the AT axels are different. At least one of the 8 boots was on with a zip > tie. I didn't see any clamps specifically for this at my FLAPS so I > thought > I would ask the list. > > Also, the place I had do it when I first bought the van apparently didn't > put the little washers on the cv bolts (the wide, two-per-bolt, > washer-like > things were there, however, I'm just talking about the circular ones). I > have only put a couple of bolts in on each side (just enough to determine > the left-right placement of the engine in the van), using the washers > scavenged from my MT donor van. I noticed that the washers are > specialized, > with little diagonal grooves or ridges on them, which makes me wonder if > they are important, and what the purpose of those grooves are. > > Anyone know? > > Thanks, > > mike > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1382 / Virus Database: 1520/3865 - Release Date: 08/29/11 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.