In addition to all of the other comments, You said that the fridge was taken out and worked on. Did they clean the burn chamber? If so, fine, but if NOT, then here is what my burn chamber looked like when I took it apart: https://picasaweb.google.com/109850655807089990041/Vanagon# Also, if you take the burn chamber apart, the safety sensor, that rides above the flame, must be correctly positioned to sense the flame, otherwise the safety valve will not get the message that the flame is ON, and will not let the gas through. Also, FWIW, here is my "Fridge" post: http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0308D&L=vanagon&P=R16178 M2CW. Malcolm >________________________________ >From: Leonard Sitongia <sitongia@ONEBEAM.NET> > >Thanks so much for your help! > >==Leonard E. Sitongia > One Inextricable Beam > http://www.onebeam.net/ > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.