Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2011, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 30 Aug 2011 20:42:36 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: clamps for cv boots, ridged washers for cv bolts
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

sounds great then ! go for it. a new product perhaps for vanagon owners !

cow leather or what ? Elk ? Moose ? ----- Original Message ----- From: "Jim Felder" <jim.felder@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, August 30, 2011 5:27 PM Subject: Re: clamps for cv boots, ridged washers for cv bolts

> Mine come apart in the good clean Alabama air. I have heard LOTS of > complaints on this list about bad CV boot rubber in the last few years. > But > the dealer suggestion is a good one. But by the way, the leather boot idea > was not intended to be temporary, but lifetime. It wouldn't take fifteen > minutes to make a couple of them to try. > > Jim > > On Tue, Aug 30, 2011 at 7:08 PM, Scott Daniel - Turbovans < > scottdaniel@turbovans.com> wrote: > >> hey .. >> maybe it's the ozone or other pollution in southern California eating >> the >> boots. >> worth considering. >> >> >> >> ----- Original Message ----- From: "Jim Felder" <jim.felder@GMAIL.COM> >> To: <vanagon@GERRY.VANAGON.COM> >> Sent: Tuesday, August 30, 2011 3:13 PM >> >> Subject: Re: clamps for cv boots, ridged washers for cv bolts >> >> >> I am having my local shop save me some of the metal parts of discarded >>> boots. I am going to try to sew up some leather (or even waterproof >>> nylon) >>> boots to replace the rubber. >>> >>> >>> >>> Jim >>> >>> On Tue, Aug 30, 2011 at 4:48 PM, mark drillock <mdrillock@cox.net> >>> wrote: >>> >>> I have had a lot of early failures of replacement boots myself and >>> would >>>> love to find a source for boots that would last even 1/4th as long as >>>> the >>>> originals did. I have had new boots rot off a parked van inside of a >>>> year, >>>> parked next to a van with 20+ year old original boots still intact. I >>>> have >>>> wondered if it the grease, the rubber, both, or what? >>>> >>>> I don't see much need for clamping the small ends either. I guess if >>>> you >>>> drive a lot in deep water it might make a difference. >>>> >>>> Mark >>>> >>>> >>>> Jim Felder wrote: >>>> >>>> Let me rephrase that. Never have I seen evidence of either water or >>>> dirt >>>>> in >>>>> an INTACT CV joint. >>>>> >>>>> The constant splitting of this new rubber product everyone has gone to >>>>> is >>>>> what has me concerned. >>>>> >>>>> Jim >>>>> >>>>> >>>>> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.