Date:         Wed, 31 Aug 2011 12:00:02 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Refrigerator lighting
Comments: To: Leonard Sitongia <sitongia@onebeam.net>
In-Reply-To:  <CAB2Rwfijy0z=yfDQOQuk7gKa3PnVNk=aBW9avgfk=-nzxkpajg@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Ok. One more reply.

Here's a link to a bunch of pictures I took of my Dometics

https://picasaweb.google.com/musomuso/DometicPics

Some of the info may not be 100% correct as I've been learning along
the way, but the pics themselves may serve to provide some insight
into the various parts.

The added red wires are mods I made to my fridge.

Neil.

On Wed, Aug 31, 2011 at 11:54 AM, neil n <musomuso@gmail.com> wrote:
> On Wed, Aug 31, 2011 at 11:47 AM, neil n <musomuso@gmail.com> wrote:
>
>
>
>> alignment. A wood dowel can be used to tweak the manifold so it lines
>> up. You want 12-6,  3-9 o clock correct and up-down position of screw
>> holes to "sit" in alignment to flue parts.
>
>
> 12-6, 3-9 refers to the actual angle of the manifold to outer plate,
> looking end on at body of van.
>
> In this pic you see red RTV
>
> https://lh5.googleusercontent.com/-safEblifyvU/THIPdiZ80NI/AAAAAAAADrk/UMAW4xkAQHM/s720/DometicFlueGap1.jpg
>
> If everything lined up properly, gasket ok, no need to add sealant.
> The sealant I added was "overkill".
>
>
> Neil.
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
>
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>



-- 
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines