Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2011, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 29 Aug 2011 13:09:57 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: PSA- wear safety glasses when working with springs!
Comments: To: pat <psdooley@VERIZON.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

wow...........thanks for telling this story. One would never think that could happen...just looking at a fresh weld.

one good thing about eyeballs needing glasses the older one gets.. it's automatic eye protection ! Scott www.turbovans.com

----- Original Message ----- From: "pat" <psdooley@VERIZON.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 29, 2011 11:17 AM Subject: Re: PSA- wear safety glasses when working with springs!

> Yeah, they used a needle on my eye to flick a piece out. > The ER doctor said I might get a rust stain but it didn't happen. > I was welding a stainless header. Got done and went to inspect my work, > got > real close to the welded area, oblivious to the popping noises of hot > metal > flaking off around the heated area. > One little flake hit the brown part of my eye and fused there. No amount > of > flushing would get it out. > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Mike > Sent: Monday, August 29, 2011 11:56 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: PSA- wear safety glasses when working with springs! > > I once was blowing some metal shavings off of a workbench, and a piece > went > into my eye. The piece was gone by the time I got to the doctor, but it > left a painful scratch on the cornea, as well as a rust ring where it had > been. They used a dremel to buff out the rust ring! Scary..... > > Mike B. > > Sent from my Verizon Wireless Phone > > J Stewart <fonman4277@COMCAST.NET> wrote: > >>And when using a Dremel! Twice, almost a year to the day apart, grinding > with my Dremel on my Vanagon put me at the eye doctors to get a small > metal > fragment removed from my eye. The second time I DID have safety glasses, > but > had pulled them down to get a better look at what I was working on-then > didn't pull them back up-big mistake ( I should mention that I wear > regular > eyeglasses and I thought they offered enough protection-they don't!). > Recently on the show "American Restorations" there was a shot of the shop > owners 17 year old son grinding away on a piece of metal with NO safety > glasses on. A few minutes later there is a shot of him, clipboard in hand, > writing up an estimate for a customer and he IS wearing safety glasses! > Guess there is more of a chance of that ball point pen flying out of his > hand and hitting him in the eye than metal fragments from an angle > grinder. >> >> >> >>Jeff Stewart >> >> >>----- Original Message ----- >> >> >>In this case a large hose clamp from an ALH TDI engine. >> >>This was a spring type hose clamp for the plastic intake pipe. >> >>I didn't use hose clamp pliers since a regular pair was closer. >> >>That sucker slipped out of the jaws of the pliers, flew about 6 feet >>horizontal and bounced off the cover of my service cart, landing neatly in >>the top drawer. >> >>It happened in an instant, with considerable force. >> >>While slightly amusing, I quickly realized how easily I could have been >>blinded in one eye if it took a different path. >> >> >> >>Scott had mentioned wearing safety glasses when working with these things >>and I knew better, but just took a shortcut. Got lucky. >> >> >> >>Same thing with drill bits. I had one lock in a metal plate and shatter. A >>piece flew right past my face and blew out the fluorescent bulb on the >>ceiling. >> >>That bit fragment could have easily hit me in the eye. >> >> >> >>All you vanagon DIY'ers, please wear your safety glasses.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.