Hi all. Just double checking. I'm finally getting around to installing a VSS sensor from a Mk2 VW (in speedometer). It appears to be the same or very similar to the Vanagon cruise control inductive pickup. Does this part sit on top of the back of speedometer or push further into the hole? These images seem to show it sitting on top of the plastic: image of it installed on some other type of VW: http://www.angrymods.com/projects/scirocco/cruise_control/speed_signal_out.jpg Installed on Vanagon speedometer: http://images.thesamba.com/vw/gallery/pix/461683.jpg Or does it push further into the hole? e.g. ears where screws pass through push past face of black plastic? It would take a little effort to push it in, so am thinking it sits on the black plastic. Thanks much, Neil. -- Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.