Date: Fri, 2 Sep 2011 19:10:51 -0700
Reply-To: neil n <musomuso@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: neil n <musomuso@GMAIL.COM>
Subject: Re: Jetta Conversion: Exhaust Bracket Redo PICS. Questions
In-Reply-To: <CAB2RwfjONtV+bxhTRmkdRuGU4u9mF5rS370chOQk-=tDVijD3w@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
So I shouldn't have been so quick to post! Lying under my van, looking and
thinking more, it seems a new arm with curved 1/2 moon plate should be fine.
I'd clamp the cat to it.
FAS attaches the cat to a bracket. They've done more swaps than me so doing
this must be ok. All I could see was creating some kind of hot spot by
covering any of the cat body. My thinking is that since the cat impedes
exhaust flow somewhat, it would need as much air as possible flowing over it
to keep it cool.
Neil.
On Fri, Sep 2, 2011 at 4:36 PM, neil n <musomuso@gmail.com> wrote:
> Hi all.
>
> Low Kb images of what I intend to do:
>
>
> https://lh4.googleusercontent.com/-B3Ackj_sCv0/TmFksnl8nQI/AAAAAAAAFQk/mSo_eDxjDVU/s720/CatToEngineBracket3.jpg
>
>
> https://lh4.googleusercontent.com/-ZzZuC7hDB7A/TmFktSlhRyI/AAAAAAAAFQs/pCpXKMPq25A/s720/CatToEngineBracket1.jpg
>
>
> https://lh4.googleusercontent.com/-rSsevA6jWFo/TmFkswa3loI/AAAAAAAAFQo/MNxQztNkmmA/s720/CatToEngineBracket2.jpg
>
> This would re-use the old bracket I made. I would cut upper 1/2 of half
> moon, make it narrower, shape it better to the cat and either weld it or
> clamp it on.
>
> I've seen the driver-side support arm done this way on Tiicos. From FAS
> website:
>
> http://www.foreignautosupply.com/uploads/Exhaust_2.jpg
>
> Would this create a hot spot on the cat? Can anyone see why I shouldn't do
> this? Would welding bracket on be better than clamping bracket on? I have a
> big clamp that was holding this bracket to the muffler.
>
> The goal is to better brace the cat/muffler as a "unit" to stave off any
> more cracks at muffler or cat pipes. Welding the arm to the cat inlet may be
> better, but on my exhaust, it seems doing that would put arm close to one
> fastener and possibly the O2 sensor.
>
> Thanks,
>
> Neil.
>
>
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp
>
> '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>
>
>
--
Neil n
65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp
'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
Vanagon VAG Gas I4/VR Swap Google Group:
http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines