please forgive those who may not have caught that one. ----- Original Message ----- From: "mark drillock" <mdrillock@COX.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, September 11, 2011 6:25 AM Subject: Re: Headlight Upgrade Eilemma
> As I said in my original post. > > >> ............... >> >> The error with regard to the high beam current route probably arises >> from the fact that a second current path exists feeding the hi/lo >> selector switch. This second path is active only while the selector >> switch is held in the up position by the driver and plays no active role >> during either high or low beam operation otherwise. >> >> Mark >> >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.