Gregg, I have a few of these. The low side usually is a metal pipe that is in a "U" shape. Is that the part you need or the fitting that attaches to that that is on the end of the hose itself? The fitting that is on the end of the hose is a standard fitting that any AC shop should be able to get easily. I just got my local NAPA to make up a hose for me and that got that fitting no problem. I can email you the part number off of my invoice if that would help you out. Let me know if I can help you further. -- Thanks, Ken Wilford John 3:16 www.vanagain.com Phone: 856-327-4936 Fax: 856-327-2242
On 9/15/2011 5:21 PM, Gregg Carlen wrote: > Hey folks, > > I'm having my AC hoses rebuilt by my local AC specialist. He has or can get everything except the fitting on low pressure side that inserts into the back of the compressor. > > The guy at BD wasn't sure if he could get one. Anyone know of a source that stocks them? > > I couldn't find anything about the specific part # or a supplier in the archives and I'm traveling (away from Bentley) to look it up. > > Gregg > Northern Virginia > 90 Westy, 2WD > Stock AC converted to 134a |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.