Got another couple of hours work on the Diesel injection pump issue today, but made no real progress. Yesterday before it got dark I had gotten the timing belt and pulley off so I had access to the injection pump drive shaft seal. Today I tried getting the drive shaft seal out in various ways: 1. drilled small holes with a dremel in the (metal) lip of the seal. Screwed in screws and tugged at the screws. Unfportunately the screws would strip the threads and seal would not move. 2. Along the lines of this guy I tried to pry it out. Also no luck. http://crustycrank.com/resealinjpump.htm (I used one of those trim removal tools which gave me a nice grip behind the seal lip, but I could not make it move. Tried pulling straingt out with both hands (real knuckle buster working witht he pump in the van). Also tried leveraging the pry tool off the pump flange. Still no luck. 3. Made a hook from a bike spoke with the flange cut off. I could get the J-part in betwen the seal and shaft, then tuen it 90degrees and have the J catch the seal lip. However either the seal lip would pierce or the bike spoke bend would straighten, but the seal would not move. So much trouble for what I thought shoudl have been a relatively easy seal-pop-out... Anyone has suggestions for what to do? I could use a drift and try to collapse the seal outer ring, but I'm adraid a slip would make me strike the drive shaft just on the surface where the seal rides. Thanks for any tips or ideas. Martin (and '82 Westy 1.9TD "Poppie") |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.