Date:         Sat, 24 Sep 2011 10:13:27 -0400
Reply-To:     ed donnen <spliced.surprise@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ed donnen <spliced.surprise@GMAIL.COM>
Subject:      Re: Wiper Shaft Stripped
Comments: To: craig cowan <phishman068@gmail.com>, mdrillock@COX.NET
Content-Type: text/plain; charset=ISO-8859-1

So Craig got me thinking- that must be the problem with my wiper!  I didn't
realize the spline was tapered.  I took Mark's idea and used a punch to make
the hole smaller rather than a spline.  In my experience hitting  a socket
with a hammer can ruin the socket.  Anyway, I did it and now everything fits
like new.
THANX guys
ed- the one with two wipers that work on a 91 DoKa

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.