Date:         Sun, 2 Oct 2011 16:17:13 -0400
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: insulating hot side of Dometic refer
Comments: To: Edward Maglott <emaglott3@gmail.com>
In-Reply-To:  <4e88b872.09b9340a.60f0.02b3@mx.google.com>
Content-Type: text/plain; charset=ISO-8859-1

FWIW, that stuff (close up image):

https://www.designengineering.com/sites/default/files/imagecache/product_full/dei-versashield.jpg

looks a lot like the stuff Phil Z gave me. I insulated my Dometic
exhaust with it.

Neil.

On Sun, Oct 2, 2011 at 3:15 PM, Edward Maglott <emaglott3@gmail.com> wrote:

> finally made it to the flaps and saw this at Advance Auto:
> http://www.designengineering.com/category/catalog/design-engineering-inc/component-specific-products/versa-shield
>
> That looks like what I will try for insulating the hot exhaust pipe
> where it comes up out of the fiberglass-inside-sheet-metal-column all
> the way to the end at the van's sidewall. Unless someone shouts out
> "No don't do that!"
>
> Edward
>



-- 
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines