Date:         Tue, 4 Oct 2011 21:29:39 -0400
Reply-To:     John Meeks <vanagon@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Meeks <vanagon@GMAIL.COM>
Subject:      Re: Mullendore port help
Comments: To: Edward Maglott <emaglott3@gmail.com>
In-Reply-To:  <4e8bab5f.cb58340a.5e8b.fffff36f@mx.google.com>
Content-Type: text/plain; charset=ISO-8859-1

Don't know if these pics will help. The motor should be s bit to the left of
the hole.
https://picasaweb.google.com/112346123305551852781/BlowerMotorAccessHole

John Meeks
'91 Vanagon MV
Northern Michigan

Vanagon Rescue Squad
www.vanagonauts.com



On Tue, Oct 4, 2011 at 8:57 PM, Edward Maglott <emaglott3@gmail.com> wrote:

> I found my once squealing heater was not working at all and it's fuse
> was blown.  It had a 25A fuse, which was supposed to be 30 according
> to Bentley.  I put in a 30A and it is back running but I wanted to do
> the Mullendore port lubrication.  I drilled the hole as specified and
> got a light in there through the big air inlet opening but I do not
> see the motor.  It is supposed to be straight back?  If I look
> straight back I see a rectangular opening that looks like it might be
> about 5" wide and 2" tall.  I looked all around as much as I could
> and didn't see the end of the motor.  Help please.
> Edward
>