Date:         Wed, 19 Oct 2011 20:22:58 -0700
Reply-To:     Jeff Schwaia <vw.doka@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Schwaia <vw.doka@GMAIL.COM>
Subject:      Re: Sometimes it does not ...
In-Reply-To:  <A0BC4D00EDB74EDC9F4E12FD55B52496@customerPC>
Content-Type: text/plain; charset="us-ascii"

The cheapo coolant level sensors are known to be unreliable right out of the
box.  I would try another to make sure.  A German one if possible.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
HotelWestfalia
Sent: Wednesday, October 19, 2011 8:00 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Sometimes it does not ...

Hi to all,

Mostly it does.  The blinking.  It's an '85 Westy.  I have changed the #24
relay, the level sensor and it is still the same.  I have even let it blink
with "key on" for 15 seconds before I start, but it does not help.  Once in
a while it stops blinking and makes me believe it's fixed, but then I try it
again and it won't stop blinking.
I did read up some stories on it, but honestly none of them was addressing
it so one could fix it.
Any of you know this?
Zoltan